3D Printed Gate Holder for Razer Atrox

I don't know if anybody is interested in it but I figured I'd post it here anyways.
I made a little 3D printed box to hold an extra gate (to switch between square & octagon). The box screws into the hex floor of the Razer Atrox arcade stick.

Personally, playing Street Fighter, I use the octagon gate for command characters, and the square gate for charge characters. I may be the only one - but since I change gates frequently, I wanted something to hold/store the spare in, since it's sometimes tough to cram it on top of the cable in the cable holder.

It's fairly shallow and admittedly not perfect, but it works pretty well. I experimented with height, and ended up having to make it this small to make it fit anywhere in the stick.
It will hold the gate in place even if you flip the stick in most cases - on the right side, the cables hold it down in place. On the left side, the stick holds it down in place. That said, if you're travelling with the stick there's a chance it'll find it's way out of the holder - not a big deal but just want to include it.

You can buy the holder off of Shapeways - http://shpws.me/EQlf


Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.