Happy Saturday morning to everyone.
Little background. I have a XBOX360 madcatz TE S chunli fightstick. I modded it with the phreakmods cerebus PCB to work on the PS3 and PC. Just got SFV so needed my stick to work on the PS4. Bought a brook converter and connected it all up and everything worked great (except for the 8 sec delay). So i attempted to update the firmware on the converter. Plugged everything in to my PC, downloaded the update and began the process. So i looked away for a bit and came back and saw the stick had no connection light, the converter still showed its link light but i failed to see if the update went through. At that point i unplugged the stick then tried to plug it back in. Now the stick does not turn on. The converter still shows a light but nothing for the stick. It still does not work when plugged in to the PC w/out the converter. I opened it up to make sure all the connections are good and everything seems ok. Has anyone had this happen? Any help would be much appreciated!
Little background. I have a XBOX360 madcatz TE S chunli fightstick. I modded it with the phreakmods cerebus PCB to work on the PS3 and PC. Just got SFV so needed my stick to work on the PS4. Bought a brook converter and connected it all up and everything worked great (except for the 8 sec delay). So i attempted to update the firmware on the converter. Plugged everything in to my PC, downloaded the update and began the process. So i looked away for a bit and came back and saw the stick had no connection light, the converter still showed its link light but i failed to see if the update went through. At that point i unplugged the stick then tried to plug it back in. Now the stick does not turn on. The converter still shows a light but nothing for the stick. It still does not work when plugged in to the PC w/out the converter. I opened it up to make sure all the connections are good and everything seems ok. Has anyone had this happen? Any help would be much appreciated!
