Hori Real Arcade Pro Thread v1 (OLD THREAD) Please use new thread linked in first post.

NEW THREAD IS HERE:

http://forums.shoryuken.com/discussion/196423/hori-real-arcade-pro-thread-for-all-versions-in-progress-could-use-your-help-and-input-v2

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--



This post is in progress and will forever need updating.





IF YOU ARE ABLE TO HELP PROVIDE INFORMATION, PHOTOS, DETAILS, OR PERHAPS EVEN HELP DO RESEARCH USING THE LINKS AT THE BOTTOM OF THIS FIRST POST IN SPOILER TAGS AND REPORT BACK, IT IS MUCH APPRECIATED.




It's taken me a lot of time to gather this information up so far, put it in a neat format, find photos and resize etc. If you can volunteer to help for the good of all arcade stick lovers and SRK TT, please do.

---

---

---

---

---

First off, I've gotta shout out @Superking for the original post back in July 2005 and for the work he did in keeping track of info and data on the Hori RAP sticks at least up until the middle of the PS2 gen and some of the PS3/360 gen.
Below you'll see the info he organized reworked in a new format with more info and photos.

Original thread (39 pages of topic from July 2005 to mostly April 2012)
http://forums.shoryuken.com/discussion/13083/hori-real-arcade-pro-faq-for-all-versions/p1

Shoutouts to those who've helped provide information on this updated list that deserve credit for their contributions:

@hibachifinal @VirtualCosmic @Darksakul @NENDO @Digital-

---

---

---

---

---

If you have general arcade stick questions, please ask in the "Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)" thread
http://forums.shoryuken.com/discussion/194283/absolute-question-and-answer-thread-v-3-ask-your-questions-here

If you desire information on other arcade sticks that are not listed here or want suggestions on what to buy, please visit the "What Stick/Controller Should I Buy? Read the Guide on Pg 1 Before Posting." thread
http://forums.shoryuken.com/discussion/137321/what-stick-controller-should-i-buy-read-the-guide-on-pg-1-before-posting/p1

There will be no tier list, and there will likely not be a "I SUGGEST YOU BUY ________ ARCADE STICK" info.

This is information for you to use to your advantage to make an independent decision based on what features you may or may not enjoy.
PLEASE PLEASE PLEASE do not come in to this thread and just ask "Which one should I buy?".
Use knowledge below to grow, think, and learn.

---

---

---

---

---

Listed in order of console:

---

---

---

Playstation 1 / Playstation 2

---

---

---

Hori RAP1
=Hori Real Arcade Pro (Mirror Finish)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg or 5.7 lbs)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Mirror finish looks nice but is easily susceptible to scratches and fingerprints
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK
=Mounting a Seimitsu LS-32 is possible with modification, previous documentation lost to GeoCities

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches

Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP CFJ
=Hori Capcom Fighting Jam

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK


Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP1
-Hori Real Arcade Pro Orange Amazon Exclusive

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions-
=What is the official title for this arcade stick from Hori?
=TO EDIT

---

---

---

Hori RAP1 SA
=Hori Real Arcade Pro Special Addition
=Special Addition also can be viewed as Hori's way of saying Sanwa (SA)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Sanwa OBSF-30RG and OBSF-24 in custom Vermilion color

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP1 SE
=Hori Real Arcade Pro Special Edition
=Special Edition also can be viewed as Hori's way of saying Seimitsu (SE)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimitsu LS-32-01

Buttons-
-Seimitsu PS-14-GX

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori AH1
=Hori Arcana Heart Arcade Stick
(unsure of official title since it's difficult to find data on now)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori AH2
=Hori Arcana Heart 2 Arcade Stick
(unsure of official title since it's difficult to find data on now)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=NEED INFO/DETAILS

Buttons-
=NEED INFO/DETAILS

PCB-
=NEED INFO/DETAILS

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori FUC-LE
=Hori Real Arcade Pro Stick Fate/Unlimited Codes Limited Edition
(unsure of official title since it's difficult to find data on now)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=NEED INFO/DETAILS

Buttons-
=NEED INFO/DETAILS

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP2
=Hori Real Arcade Pro 2

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP2 SA
=Hori Real Arcade Pro 2 Special Addition
=Special Addition also can be viewed as Hori's way of saying Sanwa (SA)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Sanwa OBSF-30 (Blue) and OBSF-24 (Dark Hai specifically made for this stick)

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

HRAP SCIII
=Hori Real Arcade Pro Soul Calibur III

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=NEED INFO/DETAILS

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

HRAP Tekken 5 JP
=Hori Real Arcade Pro Tekken 5

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

HRAP Tekken 5 10th Anniversary
=Hori Real Arcade Pro Tekken 10th Anniversary

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
-Hori

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

---

---

---

Playstation 3

---

---

---

HRAP3
=Hori Real Arcade Pro 3

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS3 cable exits base on back
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

HRAP3 SA
=Hori Real Arcade Pro. SA

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight ___________
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
+Sanwa OBSF-30, OBSF-24

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS3 cable exits base on back
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP 3 SE
=Hori Real Arcade Pro. 3 SE

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-01

Buttons-
+Seimitsu PS-14-G, PS-14-D

PCB-
=same as HRAP 3

Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP 3 Amazon JP
=Hori Real Arcade Pro Amazon.co.jp Edition

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs


Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-HORI stock buttons

PCB-
=same as HRAP 3

Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP 3 BlazBlue
=Hori Real Arcade Pro. 3 BlazBlue

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
+Exclusive blue case

Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-HORI stock buttons

PCB-
=same as HRAP 3

Wiring-
-Buttons are PCB Mounted
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori SFIV
=Hori Street Fighter IV Arcade Stick
(unsure if this is "official" title)
(Does not have RAP in the name but is same build/parts)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black case


Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Red/Black theme with Ryu & Ken

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK with Red Balltop

Buttons-
-HORI stock buttons (Red)

PCB-
=same as HRAP 3 (assumed)

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
=Unsure whether joystick is 5 pin harness or individual soldered on microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP 3 Tekken 6
=Hori Real Arcade Pro. 3 Tekken 6

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black base

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=Type of joystick unknown (Black balltop)

Buttons-
=Type of button unknown (Dark Hai color)

PCB-
=Same as HRAP 3 (Assumed)

Wiring-
=Unsure if buttons are quick disconnects or soldered to PCB
=Unsure if joystick is 5-pin harness or soldered to microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP 3 Tekken Tag 2 Prologue
=Hori Real Arcade Pro. 3 Tekken Tag 2 Prologue
+Last ever Original HRAP design produced

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings), uses the JLF mounting plate points
+Namco NOIR Layout

Plexi/Art-
=No default plexi

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-HORI stock buttons

PCB-
=Same as HRAP 3

Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

---

---

---

Playstation 4 / Playstation 3

---

---

---

Hori RAP V4
=Hori Real Arcade Pro V4 Hayabusa for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1

Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
=Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB

Wiring-
=Typical

USB Cable-
=Wire and cord compartment

Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.

---

---

---

Hori RAP V4 Silent
=Hori Real Arcade Pro V4 Silent Hayabusa for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1
(Same thread as non-silent version)

Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick with optical switches

Buttons-
=Hori Kuro buttons with silencer pads

PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
-Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB

Wiring-
=Typical

USB Cable-
=Wire and cord compartment

Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.

---

---

---

Hori RAP 4 Kai
=Hori Real Arcade Pro 4 Kai for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back

Metal Panels-
+Both top and bottom metal panels
=RAP 4 Kai has Vewlix layout with wider spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.

Bottom Padding/Feet-
=Padding on bottom where stick sits on legs
=No feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
-Signal/Ground wires are soldered on to buttons

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Unanswered Questions Due to Insufficient Testing-
=Is the PCB the same for both models of this body type?
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.

---

---

---

Hori RAP.V
=Hori Real Arcade Pro.V Hayabusa for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
-Signal/Ground wires are soldered on to buttons

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.

---

---

---

Hori DoA5LR
=Hori Dead or Alive 5 Last Round for PS4 & PS3
(Not technically an HRAP as it has no "Real Arcade Pro" in the title, but uses same PCB and case as other HRAPs)

SRKTT thread (DoA5LR)-
http://forums.shoryuken.com/discussion/194638/hori-ps4-ps3-dead-or-alive-5-last-round-stick/p1

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
=DoA5LR has an extra piece connected to front middle of case with analog sticks. Unsure if removable yet due to insufficient testing

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons
=Signal/Ground wires are soldered on to buttons

PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.

---

---

---

Hori RAP4 Premium VLX
=Real Arcade Pro 4 Premium VLX Kuro for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/195793/the-hori-ps4-vlx-thread/p1

Case-
Hori VLX Case (Same as VLX models for PS3/360)
=Sizes - Width = 570mm, Depth = 260mm, Height (including lever) = 140mm
=Weight (5.4kg/11.9lbs)
=Interior of case has plenty of space for mounting PCBs
=PS4 touch panel on back of case

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing

Bottom Padding/Feet-
=Padding

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Insuffiecent testing

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m/9.8ft)

Unanswered Questions Due to Insufficient Testing-
To Edit

---

---

---

-

---

---

---

XBox 360

---

---

---

Hori RAP EX
=Hori Real Arcade Pro. EX

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
-HORI stock buttons

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
=Unknown

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP EX-SA
=Hori Real Arcade Pro. EX-SA

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
+Sanwa OBSF-30, OBSF-24

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
=Buttons are quick disconnects, Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=Do we have details on the PCBs? CommonG/SecondaryButtonPCB etc?

---

---

---

Hori RAP EX-SE
=Hori Real Arcade Pro. EX SE

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs


Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations


Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-01

Buttons-
+Seimitsu PS-14-G, PS-14-D

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP Deathsmiles
=Hori Real Arcade Pro. Deathsmiles Stick

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
-HORI stock buttons

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP Deathsmiles IIX
=Hori Real Arcade Pro. Deathsmiles IIX Stick

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels
+Namco NOIR Layout
- Two-point Joystick Mount (Seimtisu VF/JLF Wings)

Plexi/Art-
=No default plexi
=Plexi options available NOT AVAILABLE at Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
-HORI stock buttons

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP Mushihimesama Futari
=Hori Real Arcade Pro. Mushihimesama Futari Stick

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
+Exclusive green case

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-K-SS2

Buttons-
-HORI stock buttons

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori OG
=Hyper Stick Pro Otomedius Gorgeous Ver. (Konamistyle Limited Edition)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (_______________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=Sanwa JLF-TM-8T-SK-GT-B (Octogate)
+Uses Yamatake MS-Y-3 microswitches (not Omron)

Buttons-
=Sanwa OBSF-30, HORI 24mm

PCB-
=Touch screen
=PCB must be unique from other versions of RAP due to touch screen

Wiring-
=Joystick has individually soldered microswitches
+Buttons are quick disconnects

USB Cable-
=USB connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP.EX Tekken 6
=Hori Real Arcade Pro.EX Tekken 6

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black base

Metal Panels-
+Both top and bottom metal panels

=No default plexi
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=Type of joystick unknown (Black balltop)

Buttons-
=Type of button unknown (1Red/1Blue/1Yellow/1Green/4Black)

PCB-
=Same as HRAP.EX (Assumed)

Wiring-
=Unsure if buttons are quick disconnects or soldered to PCB
=Unsure if joystick is 5-pin harness or soldered to microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

---

---

---

XBox One

---

---

---

to edit

---

---

---

Unreleased
Contains arcade sticks that saw development but were never released on any retail scale

---

---

---

"STOCKING Matsui" HORI Real Arcade Pro
-HORI built a special Real Arcade Pro. for use by STOCKING Matsui, a Tekken player, for his trip and participation in Evolution 2005
-Only 1 is known to exist, making it the most limited edition Real Arcade Pro.

Article sources-
Conception: http://www.itmedia.co.jp/games/articles/0508/09/news011.html
EVO2005: http://www.itmedia.co.jp/games/articles/0508/19/news044.html

Case-
RAP Base
=Weight (2.6 kg or 5.7 lbs)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
+Philips Top panel bolts, can be opened with a 100yen coin
+Exclusive RED case

Metal Panels-
+Both top and bottom metal panels
=turbo panel was eliminated
+Namco Layout (Similar to Japanese Tekken 5 HRAP)

Plexi/Art-
+Custom HORI-made overlay with custom Art

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-5x Hori buttons, 2x 24mm Hori buttons
-Hole Plugs on 3 slots

PCB-
=Standard RAP Playstation 1/2

Wiring-
+Buttons are quick disconnects
+Joystick uses 5-pin connector

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP EX RS-1
=Hori Real Arcade Pro. EX RS-1
=Radiant Silvergun licensed stick (meant to co-incide with the XBLA remaster)
-Product cancelled and never saw production

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-K-SS2

Buttons-
+Seimitsu PS-14-G, PS-14-D

PCB-
=Never saw production

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

---

---

---

Hori RAP AX S+G
=Hori Real Arcade Pro AX S+G
-Product cancelled and never saw production

SRKTT thread-
http://forums.shoryuken.com/discussion/175629/hori-real-arcade-pro-ax-s-g

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimitsu LS-32-01

Buttons-
+Sanwa OBSF-30RG

PCB-
=Never saw production

Wiring-
=Never saw production

USB Cable-
=USB 2.0
=No cord compartment

---

---

---

Uncategorized or detailed yet

---

---

---

-All sticks with Hori's 2nd main RAP base model (VX/V3/V4/V4Silent/KaiVariants/etc) for 360 and PS3 and XB1 (PS4/PS3 versions already listed)
-All XB1 sticks whether 2nd main RAP base model or 3rd (HRAP.V Hayabusa/whateverelse)
-Colors of all cases, buttons, and balltops listed on each stick












BELOW SPOILER TAG IS FOR INFORMATION THAT I HAVE NOT YET BEEN ABLE TO SORT THROUGH OR UTILIZE IN FINDING INFORMATION