The title says it all. I've just completed the soldering/wiring of this mod, and can not yield ANY response via the Imp V2's RJ45 mount to the console. I don't have a 360 or PS4 (only PS3), but holding the Home/Guide button (which was chosen act as the Imp "switch") does nothing. I've plugged it into a PC.. still nothing.
However the stick DOES recognize my PS3 with zero issues via the stock USB ONLY; from the cable compartment. I'm not sure what that says about the mod and narrowing the cause of the issue.
I tried to include photos of the more key areas, e.g. through hole soldering of the Imp, through hole soldering of the Kitty etc. The DS4 padhack was done by SRK member EJM, so I would almost eliminate that completely as an issue. But again, the 360/PS3 side of things aren't working either (via the Imp only).
Here are said photos; I'm open to any & all suggestions.
Thanks
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
However the stick DOES recognize my PS3 with zero issues via the stock USB ONLY; from the cable compartment. I'm not sure what that says about the mod and narrowing the cause of the issue.
I tried to include photos of the more key areas, e.g. through hole soldering of the Imp, through hole soldering of the Kitty etc. The DS4 padhack was done by SRK member EJM, so I would almost eliminate that completely as an issue. But again, the 360/PS3 side of things aren't working either (via the Imp only).
Here are said photos; I'm open to any & all suggestions.
Thanks
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
